No Products in the Cart
The Smok RPM 80 features a maximum power of 80W and gives users the option of RGC Coils which can run up to tremendous wattages and deliver outstanding flavour and cloud production.
It can be used with MTL coils for freebase or salt liquids, or it can be used with DTL coils for anything else like shortfills at up to 80watts for a nice intermediate sub ohm vape.
1 x Smok RPM80 Device
1 x Smok RGC Pod (For RGC Coils)
1 x Spare Smok RPM Pod (For RPM Coils)
1 x 0.17 Ohm RGC Conical Mesh 0.17ohm Coil (for RGC Pod)
1 x 0.6ohm Nord Coil (For RPM Pod)
1 x USB Lead
1 x User Manual
The RPM80 Pod Kit is compatible with two different pod types and in-turn various coils
The RPM 80 RPM POD uses the Smok RPM Coils which are available in 1.0 Ohm for Mouth to Lung vaping and a similar draw to a cigarette. You would need to set your device to a maximum of 15w
Or the Smok RPM Coils in 0.4 Ohm for an intermediate sub ohm vaping experience with more clouds, vapor and flavour. When using these coils set your device to a maximum 25W
The RGC Conical Mesh Coil in 0.17Ohms is a low resistance coil that uses a conical mesh design funnelling airflow up through the coil for more intense flavour. Rated at up to 80 watts of power, this coil is capable of serious performance and clouds. For best results set your device between 40W - 80W
For the Smok RPM Coils in 0.4 Ohm we would recommend any liquid that's at least 60%VG/40%PG. When sub-ohm vaping with lower resistance coils, we would recommend using e-liquids with a nicotine strength no higher than 3mg as the effect of higher nicotine can be a bit harsh on the throat. Why not try a high VG shortfill which can be mixed up to 3mg nicotine strength.
If you are using the Smok RPM Coils in 0.4Ohm and would still like a higher nicotine strength we would recommend a High VG 10ml Liquid to avoid the device leaking. These are available in higher nicotine strengths, but please note that these may be quite strong when sub-ohm vaping.
Battery Capacity: 3000mAh built-in
E-Juice Capacity: 2ml
Firing Time: 0.001S
Output Wattage: 1W-80W
Output Mode: Watt
Resistance Range: 0.2ohm - 2.5ohm
Dimensions: 118 x 26 x 31.5 mm
Output power: 1-80 watts
Resistance range: 0.15-3.00?
Built in 3000mAh battery built-in
Stand by current: <100uA
Output voltage: 0.5V-4.0V
Input voltage: 3.3V-4.2V
Charging voltage: 5V
Charger output: 5V/2A
Over discharge voltage: 2.4V
Charging current: 1.2A (Max)
Overcharge voltage: 4.3V
E-liquid capacity: 2ml
Intelligent atomiser recognition
Puff monitoring system
8 seconds cut-off
Short circuit protection
Low battery warning
The maximum output power is 80W, which is powered byan internal 3000mAh Battery
You will be able to see the current battery levels of your RPM80 Kit on the digital Full Colour Display screen on the front of the device.
This is a top filling pod device so there is no need to remove the pod to fill with e-liquid
Pull out the rubber plug on the slot and add e-liquid through the slot
Press the rubber plug back carefully and firmly